350-401 Real Question, Latest 350-401 Exam Labs
DOWNLOAD the newest ITexamReview 350-401 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1jhe92wH16diopYmBGTHUrL7PJVyj0126
ITexamReview offers a free demo of Cisco 350-401 exam dumps before the purchase to test the features of the products. ITexamReview also offers 12 months of free Cisco 350-401 Exam Questions updates if the 350-401 certification exam content changes after purchasing our 350-401 exam dumps.
The Cisco 350-401 exam questions are designed and verified by experienced and qualified Cisco 350-401 exam trainers. They work together and share their expertise to maintain the top standard of Cisco 350-401 Exam Practice test. So you can get trust on Cisco 350-401 exam questions and start preparing today.
Latest 350-401 Exam Labs, 350-401 Valid Exam Questions
In order to meet the requirements of our customers, Our 350-401 test questions carefully designed the automatic correcting system for customers. It is known to us that practicing the incorrect questions is very important for everyone, so our 350-401 exam question provide the automatic correcting system to help customers understand and correct the errors. If you want to improve your correct rates of exam, we believe the best method is inscribed according to the fault namely this in appearing weak sports, specific aim ground consolidates knowledge is nodded. Our 350-401 Guide Torrent will help you establish the error sets. We believe that it must be very useful for you to take your exam, and it is necessary for you to use our 350-401 test questions.
Cisco Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Questions (Q85-Q90):
NEW QUESTION # 85
Refer to the exhibit.
A network engineer must simplify the IPsec configuration by enabling IPsec over GRE using IPsec profiles.
Which two configuration changes accomplish this? (Choose two).
Answer: B,E
NEW QUESTION # 86
Refer to the exhibit.
Which configuration establishes EBGP neighborship between these two directly connected neighbors and exchanges the loopback network of the two routers through BGP?
Answer: B
Explanation:
With BGP, we must advertise the correct network and subnet mask in the "network" command (in this case network 10.1.1.0/24 on R1 and network 10.2.2.0/24 on R2). BGP is very strict in the routing advertisements. In other words, BGP only advertises the network which exists exactly in the routing table. In this case, if you put the command "network x.x.0.0 mask 255.255.0.0" or
"network x.0.0.0 mask 255.0.0.0" or "network x.x.x.x mask 255.255.255.255" then BGP will not advertise anything.
It is easy to establish eBGP neighborship via the direct link. But let's see what are required when we want to establish eBGP neighborship via their loopback interfaces. We will need two commands:
+ the command "neighbor 10.1.1.1 ebgp-multihop 2" on R1 and "neighbor 10.2.2.2 ebgpmultihop
2" on R1. This command increases the TTL value to 2 so that BGP updates can reach the BGP neighbor which is two hops away.
+ Answer 'R1 (config) #router bgp 1
R1 (config-router) #neighbor 192.168.10.2 remote-as 2
R1 (config-router) #network 10.1.1.0 mask 255.255.255.0
R2 (config) #router bgp 2
R2 (config-router) #neighbor 192.168.10.1 remote-as 1
R2 (config-router) #network 10.2.2.0 mask 255.255.255.0
Quick Wireless Summary
Cisco Access Points (APs) can operate in one of two modes: autonomous or lightweight
+ Autonomous: self-sufficient and standalone. Used for small wireless networks.
+ Lightweight: A Cisco lightweight AP (LAP) has to join a Wireless LAN Controller (WLC) to function.
LAP and WLC communicate with each other via a logical pair of CAPWAP tunnels.
- Control and Provisioning for Wireless Access Point (CAPWAP) is an IETF standard for control messaging for setup, authentication and operations between APs and WLCs. CAPWAP is similar to LWAPP except the following differences:
+CAPWAP uses Datagram Transport Layer Security (DTLS) for authentication and encryption to protect traffic between APs and controllers. LWAPP uses AES.
+ CAPWAP has a dynamic maximum transmission unit (MTU) discovery mechanism.
+ CAPWAP runs on UDP ports 5246 (control messages) and 5247 (data messages) An LAP operates in one of six different modes:
+ Local mode (default mode): measures noise floor and interference, and scans for intrusion detection (IDS) events every 180 seconds on unused channels
+ FlexConnect, formerly known as Hybrid Remote Edge AP (H-REAP), mode: allows data traffic to be switched locally and not go back to the controller. The FlexConnect AP can perform standalone client authentication and switch VLAN traffic locally even when it's disconnected to the WLC (Local Switched). FlexConnect AP can also tunnel (via CAPWAP) both user wireless data and control traffic to a centralized WLC (Central Switched).
+ Monitor mode: does not handle data traffic between clients and the infrastructure. It acts like a sensor for location-based services (LBS), rogue AP detection, and IDS
+ Rogue detector mode: monitor for rogue APs. It does not handle data at all.
+ Sniffer mode: run as a sniffer and captures and forwards all the packets on a particular channel to a remote machine where you can use protocol analysis tool (Wireshark, Airopeek, etc) to review the packets and diagnose issues. Strictly used for troubleshooting purposes.
+ Bridge mode: bridge together the WLAN and the wired infrastructure together.
Mobility Express is the ability to use an access point (AP) as a controller instead of a real WLAN controller. But this solution is only suitable for small to midsize, or multi-site branch locations where you might not want to invest in a dedicated WLC. A Mobility Express WLC can support up to 100 Aps
NEW QUESTION # 87
Reter to the exhibit.
Refer to the exhibit. A network engineer must load balance traffic that comes from the NAT Router and is destined to 10.10.110.10, to several FTP servers. Which two commands sets should be applied? (Choose two).
A)
B)
C)
D)
E)
Answer: D,E
NEW QUESTION # 88
What is a characteristic of Cisco DNA southbound APIs?
Answer: C
NEW QUESTION # 89
An engineer measures the Wi-Fi coverage at a customer site. The RSSI values are recorded as follows:
Which two statements does the engineer use to explain these values to the customer? (Choose two)
Answer: D,E
Explanation:
In the context of Wi-Fi signal strength, RSSI (Received Signal Strength Indicator) values are measured in dBm (decibels relative to a milliwatt) and represent the power level being received by the antenna. The closer this value is to 0, the stronger the signal. Thus, a signal of -65 dBm is stronger than a signal of -75 dBm.
* For option A, without knowing the specific RSSI requirements for web surfing, we cannot definitively say that location C's signal is too weak.
* Option B states that location D has the strongest RF signal strength; however, this is incorrect as location C has an RSSI of -65 dBm which indicates a stronger signal than location D's -80 dBm.
* Option C suggests that the RF signal strength at location B is 50% weaker than at location A. This statement does not accurately describe how RSSI values work; they are not linear percentages but rather logarithmic measurements.
* Option D correctly states that the signal strength at location B (-75 dBm) is 10 dB better (stronger) than at location C (-65 dBm), which follows from understanding how decibel scales operate.
* Lastly, option E incorrectly claims that the RF signal strength at location C is 10 times stronger than at Location B. The difference in decibels does not translate to a tenfold increase in power.
NEW QUESTION # 90
......
Passing an exam requires diligent practice, and using the right study Cisco Certification Exams material is crucial for optimal performance. With this in mind, ITexamReview has introduced a range of innovative 350-401 Practice Test formats to help candidates prepare for their 350-401.
Latest 350-401 Exam Labs: https://www.itexamreview.com/350-401-exam-dumps.html
Our 350-401 certification materials can help you transfer into a versatile talent, Having a good command of processional knowledge in this line, they devised our high quality and high effective 350-401 study materials by unremitting effort and studious research, 350-401 EXAM Test Engine HELPING HAND AT FIRST GO, Cisco 350-401 Real Question The good method can bring the result with half the effort, the same different exam also needs the good test method.
Beyond presentations, you'll also find advice on how to handle special speaking 350-401 situations such as large audience formats, panel discussions, product demonstrations, interviewing, scripted speeches, and voice and speech quality.
2025 100% Free 350-401 –Useful 100% Free Real Question | Latest 350-401 Exam Labs
One instance handles all the rows in the table, Our 350-401 Certification Materials can help you transfer into a versatile talent, Having a good command of processional knowledge in this line, they devised our high quality and high effective 350-401 study materials by unremitting effort and studious research.
350-401 EXAM Test Engine HELPING HAND AT FIRST GO, The good method can bring the result with half the effort, the same different exam also needs the good test method.
So you do not need to worry about the 350-401 exam preparation just download ITexamReview 350-401 latest dumps and start preparing today.
P.S. Free & New 350-401 dumps are available on Google Drive shared by ITexamReview: https://drive.google.com/open?id=1jhe92wH16diopYmBGTHUrL7PJVyj0126