Das Fortinet NSE8_812 Zertifikat kann nicht nur Ihre Fähigkeiten, sondern auch Ihre Fachkenntnisse und Erfahrungen beweisen. Der Boss hat Sie doch nicht umsonst eingestellt. Zur Zeit braucht IT-Branche eine zuverlässige Ressourcen zur Fortinet NSE8_812 Zertifizierungsprüfung. ZertFragen ist eine gute Wahl. Sie können die Fortinet NSE8_812 Prüfung in kurzer Zeit bestehen, ohne viel Zeit und Energie zu verwenden, und eine glänzende Zukunft haben.
Die Fortinet NSE8_812 Zertifizierung wird weltweit als Zeichen der Kompetenz in fortgeschrittener Netzwerksicherheit anerkannt. Diese Zertifizierung ist besonders nützlich für Netzwerksicherheitsprofis, die für die Gestaltung, Implementierung und Verwaltung komplexer Sicherheitsinfrastrukturen für große Organisationen verantwortlich sind. Mit der NSE 8 Zertifizierung können Fachleute ihre Kompetenz in fortgeschrittener Netzwerksicherheit demonstrieren und einen Wettbewerbsvorteil in ihrer Karriere erlangen.
>> NSE8_812 Pruefungssimulationen <<
Wahrscheinlich haben viele Leute Sie über die Schwierigkeiten der Fortinet NSE8_812 informiert. Aber wir ZertFragen möchten Ihnen mitteilen, wie einfach die Fortinet NSE8_812 Prüfung zu bestehen. Die Fortinet NSE8_812 Prüfungssoftware von unserem fähigen IT-Team können Sie bestimmt befriedigen. Sie brauchen nur die kostenlose Demo der Fortinet NSE8_812 probieren. Dann werden Sie unbesorgt kaufen. Wir hoffen, dass wir bei Ihrem Fortschritt im Bereich der IT helfen können!
Die Fortinet NSE8_812 -Zertifizierungsprüfung ist eine schriftliche Prüfung, die für Fachleute konzipiert ist, die ihr Wissen und ihre Fähigkeiten im Bereich der Netzwerksicherheit validieren möchten. Diese Prüfung richtet sich an Personen, die Erfahrung in der Gestaltung, Implementierung und Verwaltung komplexer Sicherheitsinfrastrukturen mithilfe von Fortinet Solutions haben.
30. Frage
Review the following FortiGate-6000 configuration excerpt:
Based on the configuration, which statement is correct regarding SNAT source port partitioning behavior?
Antwort: D
Begründung:
Based on the configuration, the statement that is correct regarding SNAT source port partitioning behavior is that it statically distributes SNAT source ports to operating FPCs or FPMs. This is because the nat-source-port option is set to chassis-slots, which means that the FortiGate-6000 will allocate SNAT source ports to all FPCs or FPMs that are enabled when the command is entered. If an FPC or FPM is disabled from the CLI, the SNAT source ports assigned to that FPC or FPM will not be re-allocated to the remaining FPCs or FPMs. This option preserves active sessions when an FPC or FPM goes down, but does not dynamically re-distribute SNAT source ports if an FPC or FPM is powered off. Reference: https://docs.fortinet.com/document/fortigate/7.2.5/fortigate-6000-administration-guide/81276/controlling-snat-port-partitioning-behavior
31. Frage
Refer to the exhibits.
The exhibits show a FortiMail network topology, Inbound configuration settings, and a Dictionary Profile.
You are required to integrate a third-party's host service (srv.thirdparty.com) into the e-mail processing path.
All inbound e-mails must be processed by FortiMail antispam and antivirus with FortiSandbox integration. If the email is clean, FortiMail must forward it to the third-party service, which will send the email back to FortiMail for final delivery, FortiMail must not scan the e-mail again.
Which three configuration tasks must be performed to meet these requirements? (Choose three.)
Antwort: A,B,C
Begründung:
A is correct because the scan order must be changed to antispam-sandbox-content in order for FortiMail to scan the email for spam and viruses before forwarding it to the third-party service.
B is correct because the Catch-All profile must be applied to the CFInbound profile in order for FortiMail to forward clean emails to the third-party service.
E is correct because an IP policy must be created with a Source value of 100.64.0.72/32 in order to allow emails from the third-party service to be delivered to FortiMail.
The other options are not necessary to meet the requirements. Option C is not necessary because the access receive rule will already allow emails from the third-party service to be received by FortiMail. Option D is not necessary because the Catch-All profile already allows emails to be delivered to any destination.
Here are some additional details about integrating a third-party service into the FortiMail email processing path:
The third-party service must be able to receive emails from FortiMail and send them back to FortiMail.
The third-party service must be able to communicate with FortiMail using the SMTP protocol.
The third-party service must be able to authenticate with FortiMail using the SMTP AUTH protocol.
Once the third-party service is integrated into the FortiMail email processing path, all inbound emails will be processed by FortiMail as usual. If the email is clean, FortiMail will forward it to the third-party service. The third-party service will then send the email back to FortiMail for final delivery. FortiMail will not scan the email again.
32. Frage
Refer to the CLI configuration of an SSL inspection profile from a FortiGate device configured to protect a web server:
Based on the information shown, what is the expected behavior when an HTTP/2 request comes in?
Antwort: B
Begründung:
The supported-alpn parameter is set to http1.1 in the SSL inspection profile. This means that the FortiGate will only accept HTTP/1.1 traffic. Any HTTP/2 traffic will be rejected.
The following is the relevant documentation from Fortinet:
The supported-alpn parameter specifies the list of ALPN protocols that the FortiGate will accept. If the client requests a protocol that is not in this list, the FortiGate will reject the connection.
The default value for the supported-alpn parameter is all. This means that the FortiGate will accept any ALPN protocol that the client requests.
To reject all HTTP/2 traffic, set the supported-alpn parameter to http1.1.
Source: https://docs.fortinet.com/document/fortigate/7.0.0/new-features/710924/http-2-support-in-proxy-mode-ssl-inspection
33. Frage
SD-WAN is configured on a FortiGate. You notice that when one of the internet links has high latency the time to resolve names using DNS from FortiGate is very high.
You must ensure that the FortiGate DNS resolution times are as low as possible with the least amount of work.
What should you configure?
Antwort: A
Begründung:
SD-WAN is a feature that allows users to optimize network performance and reliability by using multiple WAN links and applying rules based on various criteria, such as latency, jitter, packet loss, etc. One way to ensure that the FortiGate DNS resolution times are as low as possible with the least amount of work is to configure local out traffic to use the outgoing interface based on SD-WAN rules with the interface IP and configure an SD-WAN rule to the DNS server. This means that the FortiGate will use the best WAN link available to send DNS queries to the DNS server according to the SD-WAN rule, and use its own interface IP as the source address. This avoids NAT issues and ensures optimal DNS performance. References:
https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan/19662/sd-wan
34. Frage
You must configure an environment with dual-homed servers connected to a pair of FortiSwitch units using an MCLAG.
Multicast traffic is expected in this environment, and you should ensure unnecessary traffic is pruned from links that do not have a multicast listener.
In which two ways must you configure the igmps-f lood-traffic and igmps-flood-report settings? (Choose two.)
Antwort: A,B
Begründung:
A is correct because disabling igmps-flood-traffic and igmps-flood-report on ICL trunks prevents unnecessary multicast traffic from being flooded across the MCLAG cluster members. C is correct because disabling igmps-flood-traffic and igmps-flood-report on the ISL and FortiLink trunks prevents unnecessary multicast traffic from being flooded to other switches or FortiGates that do not have multicast listeners. Reference: https://docs.fortinet.com/document/fortiswitches/6.4.0/administration-guide/381057/multicast-forwarding https://docs.fortinet.com/document/fortiswitches/6.4.0/administration-guide/381057/multicast-forwarding/381058/configuring-multicast-forwarding
35. Frage
......
NSE8_812 Deutsch Prüfung: https://www.zertfragen.com/NSE8_812_prufung.html